LANTAISI TS30 is a fast wireless car charger that is compatible with all Qi-enabled devices which equipped with a Qi-compatible cover.

一、Appearance Analysis
1、Front of box

图片1

The blank and simple front box, can be designed for OEM clients.

2、Back of box

图片2

The back of box shows the relevant introductions and specifications.

Input:DC 5V-2A, DC 9V-1.67A

Output:10W Max.

Size:116*96*90mm

Color:□Black  □Other

3、Open the box

图片3

Opening the box, what start to see is charger and a clip accessory.

4、EVA blister

图片4

After removing the box, you can see that the product is tightly wrapped in a blister box, which helps to cushion the pressure during shipping and protect the charger from damage.

5、Accessories

图片5

The package contains: Wireless car charger x 1pc, car clip x 1pc,   charging cable x 1pc, user manual x 1pc.

图片6

Equipped with charging cable for USB-C interface cable, black cable body, the length of the line is about 1 meter, both ends of the cable are reinforced anti bending processing.

6、Front appearance

图片7

TS30 is made of aluminum alloy and fire-resistant ABS+PC, the surface is designed with a lightning logo. The left and right holders and the lower holder are made of durable aluminum alloy.

7、Two sides

图片8

The design on both sides is the same, you can see that the surface case and the bottom case fit closely together.

图片9

There is a Micro interface on the bottom side.

8、Back

图片10

Some parameters, certification marks, environmental icons, the country of origin are printed on the back of TS30.

9、Weight: Net weight is 88g.

图片11

二、Wireless charging compatibility test

图片12

 

The charger was used to conduct wireless charging test for Samsung Galaxy S10. The measured voltage was 8.94V, the current was 1.01A, the power was 9.02W.

图片13

 

The charger was used to conduct wireless charging test for iPhone 8. The measured voltage was 8.95V, the current was 0.82A, the power was 7.33W.

三、Product summary

It is made of aluminum alloy and ABS + PC fireproof material, the appearance looks cool. The gravity linkage principle design uses theweight of the mobile phone itself to drive the bottom support of the holder, which is firmly clamped. It is compatible with a variety of mobile phones with wireless charging functions.


Post time: Mar-12-2021